DIY: ceramic plant fossil

For the table, the wall, or around your neck

The season for happily pottering at home with a cup of tea and a plate of biscuits has arrived. To make a stylish coaster for your copious mugs of tea, you only need a couple of things, and if you adjust the size, you can also hang it on the wall or around your neck!

DIY: Blumenfossil aus Keramik – Tollwasblumenmachen.de

You will need:

  • An attractive plant of your choice, e.g. flowering eucalyptus and pistacia
  • Self-drying clay
  • Rolling pin
  • Cookie cutters
  • Optional: acrylic varnish

Get to work

Step 1. Roll out the clay to the desired size and thickness with the rolling pin. The thicker the clay, the longer it will take to dry. 

Step 2. Cut out the desired shape with the cutter. A diameter of 10 cm is fine for a coaster; it's best to choose a smaller size for a necklace. 

Step 3. Now carefully press the plant into the clay using the rolling pin. Carefully remove the plant from the clay to leave a nice imprint. 

Step 4. Leave to dry. To speed up the drying process, you can place the clay in the oven on the lowest setting. 

Step 5. Once the clay is dry, you can finish it with acrylic varnish for a lasting and attractive result. Opt for a transparent varnish for a simple design, or choose a bright colour. 

Share your results with us on Facebook or Instagram.